banner

Tuesday 17 April 2018

HOW TO MANUALLY INSTALL QUALCOMM QDLOADER DRIVER - one Click Download

HOW TO MANUALLY INSTALL QUALCOMM QDLOADER DRIVER



I’ll just go straight to the point. This simple tutorial will show you steps to properly install Qualcomm QDLoader drivers on Windows, either Windows 8, 8.1 or 10. You may need it in few occasions involving your MIUI device powered with any variant of Qualcomm chipset. As we know it that many of Xiaomi’s most popular phones like Mi5, Mi 5, Redmi Note 3, and so on, are powered with Qualcomm Snapdragon chipset. Any way, let’s just start the guide.

HOW TO

Step 0 – Extract the Qualcomm QDLoader .zip file using either Winzip or Winrar. 

Click - Download qdloader USB Driver 


Step 1 – Open up Device Manager from control panel and you will notice a new device is detected but its driver is not installed properly

Usually it is displayed as “QHSUSB_BULK” under Other Devices.
Step 2 – Right-click on QHSUSB_BULK and choose “Update Driver Software



Step 3 – A dialog window shall appear. Choose “Browse my computer for driver software“.




Step 12 – Now click on the Browse button and locate the extracted Qualcomm QDLoader drivers.







Step 13 – The installation process shall take place immediately and a system notification will appear. Just choose “Install this driver software anyway“.



Step 14 – Once done, you will see something like this.



Step 15 – Click the Close button and check back at Device Manager window. You will now see “Qualcomm HS-USB QDLoader 9008 (COM10)” under Ports (COM & LPT) section.

Done! Congratulation, you have now installed Qualcomm HS-USB QDLoader successfully on your computer.

Friday 13 April 2018

Download HUAWEI MOBILE:- FLASH FILE LIST




Download HUAWEI MOBILE:- FLASH FILE LIST


Are you using an Huawei smartphone or tablet? If yes are you searching for the stock ROM firmware for your device? If yes is your answer again, then you are on the right page. Here you can download Huawei stock ROM firmware for all models.








Huawei Flash file is the basic requirement while reinstallation of Firmware. However, if you are limited to Firmware or stock ROM you cannot install/flash the device. You need tool to flash the device. Most of the time flashing fails, because you forget to install Driver. As, most important process to make communication between Huawei mobile, smartphones or tablet with the PC or Laptop.

Majority of Huawei Gadgets are powered by -
1- MTK CPU :- MTK Driver Installation
2- SPD CPU

MTK CPU can be flashed using SP Flash tool and you have to press Volume down as boot key while connecting to PC.

SPD CPU are flashed using Upgrade Download tool and use volume down as boot key while connecting to PC.

Mobiles should be switched off during the process of flashing.

Just Download the Stock Firmware from the page below which act as a support site for free download for any Software related issue. It contain flash file, Flash tool & driver packages.












If your Huawei device is bricked or corrupted, download Huawei stock firmware from here (based on device model number) and flash it on your smartphone or tablet to get it back to a working condition again.


Important Points:
1) Huawei Computer Inc. officially provides all the stock ROM firmware files given here. So, if you face any inconvenience while installing the firmware files on your device, contact their support team.
2) If you would like to get rooting tutorials, TWRP recovery flashing tutorials, etc., for your Huawei smartphone or tablet, let us know by dropping a comment below.
3) If the stock ROM firmware file for your Huawei  device is not available here on this page, please let us know by leaving a comment below.
4) Make sure that you flash the original IMEI on your Huawei  device after flashing stock ROM firmware file on it.













test

 

Copyright @ 2015