How to Flash Samsung Using Odin

How to Flash Samsung Using Odin 

rgin-right: 1em;">

Flash Samsung Using Odin 

Step 1 -  

Download and Install Samsung All in One USB Driver..Here is download link  

Step 2 

Download Stock Rom of Your Device .Here is download link of Samsung Official Stock Rom  

You Will Get 2 File from your Stock Rom.

#b6d7a8; font-size: xx-large;">Step 3

Next, switch off your smartphone. 

Step 4

Boot it into the “Download” mode by pressing and holding the Volume Down style="background-color: white; color: #666666; font-family: "raleway" , sans-serif;">, Power and Home buttons simultaneously. 

Now your Samsung device will vibrate. Once you have felt it, keep pressing the Volume Down and Home buttons (leave the Power button) and your device will boot into the Download mode.

Step 5

Now you will see a “ y" , sans-serif;">Warning” message as shown below. Just press the “Volume Up” key to continue.

Step 6 

Next, download Odin Flash Tool white; color: #666666; font-family: "raleway" , sans-serif; font-weight: normal;"> and extract it to a folder in your computer.

 Once done, click on “Odin3.exe” to launch its window.

AAAADMI/eWqmEr1BuOY2PapA5Or1gxVlWYM4qacRACLcBGAs/s640/Odin3-Samsung-Firmware.jpg" width="640" />

Step 7

Now connect your smartphone to the computer using the original USB data cable. 

If you have installed the USB drivers of your device properly in the Windows computer, Odin will automatically identify your device and will show a “Added” message in the “Log” section.

Step 8 

 Next, click on the “ r: #666666; font-family: "raleway" , sans-serif;">AP” button and select the “.tar.md5” file (from Step 1).

Step 9


Once the Samsung firmware file is added, click on “Start” button in “Odin” to launch the flashing process.

< /b>
Step 10


Don’t do anything during the flashing process. Once it gets completed, you will see the green “PASS” message as shown in the screenshot e below.

>

Step 10

 Now unplug your device from the computer. But when you try to boot your device normally, it will get into a boot loop. 

To fix this error, switch off your smartphone and boot into the “ x; color: #666666; font-family: "raleway" , sans-serif;">Recovery” mode by pressing and holding the Volume Up, Power and Home buttons simultaneously.

Step 11 

Once your device boots into the recovery mode, click on “Wipe data/factory reset al;">“. Once done, click on “Reboot System Now” as shown in the screenshot below.

That’s it. Now you have successfully flashed stock ROM firmware on your Samsung 

Samsung Odin Flash Tool ( All Version )

Samsung All in One USB Driver 

Samsung Stock ROM