How To Flash Stock ROM Firmware MTK Device

How To Flash Stock ROM Firmware MTK Device 

Step 1: Download the stock ROM zip file given above and extract it on your computer. You will find  //downloadmobilefirmwarefile.blogspot.com/2017/07/how-to-flash-samsung-using-odin.html">SP flash tool and Android scatter file after extracting.

Step 2: Now download Vivo USB driver and install it on your computer. In case if you have already installed USB driver on your computer skip this step.

Step 3 

Next, switch off your Vivo smartphone and remove the battery (it is removable).

Step 4

Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will find “Flash_tool.exe” file in it. Launch it.

">

Step 5

Once SP Flash tool is launched, click on 

“Download” tab.

-Flash-Process-2-1024x635.png" width="640" />

Step 6 

Now, click on “scatter-loading” button in the download tab.

Step 7

Next, click on “Open Scatter File” and select the scatter file from Step 1. For reference see the image given below.

GyIraxaM5iNtp-S9uzH42KLLzHd8-wCLcBGAs/s1600/Stock-Rom-Flash-Process-4.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;">

Step 8 

Now click on the “Download” button to start the flashing process.

">

Step 9 

connect your  Android device to your computer through original USB cable (without battery – if it is battery removable) and press volume up or volume down button

Step 10 

 The flashing process will begin momentarily and it will get completed in a minute or two. Once it is over, you will see the “Download OK ot; , sans-serif;">” green ring in SP Flash Tool.

Step 11

Now, close SP Flash tool on your computer and unplug your smartphone.