Friday, 14 July 2017

HOW TO FLASH STOCK FIRMWARE ON SAMSUNG STAR 3 GT-S5222 VIA USB

HOW TO FLASH STOCK FIRMWARE ON SAMSUNG STAR 3 GT-S5222 VIA USB





[Flash Official Firmware on your Samsung Star 3 Duos GT-S5222 Using USB]. Samsung star 3 duos GT-S5222 is a best gsm mobile phone available in the market.

this phone is really best for a Business man or a busy people because he likes to handle 2 lines on one device.But it is not the end of the mobile facility,it's come with 3.15 Mega pixel camera for great picture quality,micro-SD slot for external storage, WiFi, Bluetooth.I

f you have you own Samsung star 3 duos phone and you want to flash the flash file on it then you are on right place.In this post i am going to show you how you can easily flash official flash file on your Samsung star 3 GT-S522 from usb without any problem..follow the instruction below and flash the official file on your phone now..





Important:
  1.  Install Samsung kies driver (Recommended)
  2. Make a full backup your phone from Kies (Contacts,SMS etc)
  3. Remove your SD-card




Files are required:
  1. Flash tool Click here to download this flash tool.
  2. Flash file of Samsung star 3(Flash tool is included) Click here to download this file
  3. A original Samsung mobile usb cable.



Procedure to flash your Star 3

Step 1: Power off your mobile ,remove battery after 3 to 4 second re-enter battery.

Step 2: Now it's time to run the flash tool, double click on flashtool.exe and run it.

Step 3: Now click on 3(...) button (Watch below image)






Step 4: Now select the flash files one by one 

[Note The selecting of firmware files must be in the below order](Watch below image) 

1-S5222xxx_psi.fls 2-S5222xxx_slb.fls 3-S5222xxx_BSY.fls 4-S5222xxx_CDS.fls 5-S5222xxxx.dffs.






     

Step 5: Don't untick the custom order box.

Step 6: IN Erases Calibration! : Select (Erase whole flash before download).

Step 7: Don't change the baud rate -921600


Step 8: Now in Communication Driver drop down menu select: Infineon USB Driver (Watch below image to Step 5,6,7or8).






Step 9: Now click on next button when you click on next button A new window will appear.

Step 10: Click on start Usb 1 button(Watch below image)






Step 11: After click on start usb 1 button connect your phone to pc using Usb cable.


Step 12: Now the flashing process will start automatically,it will take 4 to 5 minutes to complete.

Step 13: When the flashing process is done,you will see a success message.

Step 14: Now disconnect your phone and remove the usb cable.


Step 15: Power on your mobile and make a hard reset by the code *2767*3855# ..It's Done.. 

Asia Teleocm Mobile EMMC Training Institute

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation.

0 comments:

Post a Comment

 

Copyright @ 2015